Red Clix RX35 Drivetrain Set

The updated Rx35 Red Clix set includes a set of matching ball bearings and washers to make it easier for you to install in a Comandante^® grinder.

The Rx35 Red Clix enables an expanded click range for the same particle size range and the same brewing methodology. The click steps with the RX35 combo are much finer, but at the same time, the click mechanism itself is as solidand stable as the standard version.

The RX35 Combo gives you an additional step between two standard clicks. This might be helpful if you want to optimize extraction time for a particular lightly roasted specialty coffee espresso shot.

For example: if you currently use the grinder with 5 clicks with the standard version, with the RX35 combo you should set 10 clicks.

Important: Only use the special red-coloured grind dial with the RX35 axle. The extra fine precision thread on both axle and dial are very delicate and will get damaged if used with the standard axle and grind dial. Please make sure you do not mix any Rx35 Red Clix parts with standard ones. Otherwise, the RX35 parts will get damaged and can‘t be used any more!

Important for C60 users: If you are using the Red Clix with the C60 then you should not use the spring that is included with the Red Clix set. 

C60 users should please always use the larger C60 spring. Please also ensure that your C60 grinder is always assembled with three ball bearing cartridges. 

The two ball bearing cartridges in the Red Clix set are simply intended as spares.

Made in Germany.